Due to the limitations of production workshops or factory areas, the product handling routes in some factories are not conventional straight lines. During the operation of electric flatcars, in many situations where the turning radius is too small or it is impossible to lay curved rails, electric turntables can be matched for this working condition.
Electric track turntable is a device used to realize the turning and reversing of track flat cars in situ. It is installed at the intersection of two tracks, and one or more tracks are laid on the platform. The surface of the track is level with the surface of the track on the ground, and the track gauge is consistent with the track gauge on the ground. The flat car runs completely until it stops on the turntable, and the turntable starts to rotate to the required angle to dock with the track on the ground. The flat car starts again and runs along the docked track to the required position. Its special function is a common equipment in rail transportation systems. The self weight load of the trolley refers to the load capacity of the supporting turntable. The rotation angle of the turntable can be set according to different customer needs, and it can stop at any angle of 360 degrees or achieve cross shaped operation of the well.
Product features:
1. Suitable for circular tracks, cross tracks, and other occasions in equipment production lines.
2. There are two types of track forms for the turntable table: "straight" and "cross"
A straight track is generally suitable for workshop ground tracks in a 90 ° form
Cross track is generally suitable for workshop ground tracks in a cross shape
3. The function of the electric turntable is to achieve a 90 ° right angle turn with the matching electric flatbed, greatly improving the efficiency of cargo operation. Effectively solves the lifting difficulties of driving and specific production process requirements, and is safe and reliable.
4. The load capacity, external dimensions, and track gauge can be customized according to user requirements.
5. Accurate docking can be achieved by adjusting the angle of the docking track through an automated positioning device, and automatic unmanned control can also be achieved.
Institution Introduction:
1. Equipment structure: The track rotating disc consists of a base, a slewing support, a rotating table, a driving device, a control box, etc. The docking of the rotating table track is achieved through automatic deceleration control using a frequency converter, and an electrically controlled safety limit device is installed between the two 90 ° positions to ensure accurate positioning during rotation of the rotating table, ensuring good alignment between the main guide rail and the ground track; There is an auxiliary support wheel set under the rotating table to ensure the safety and stability of the rotating tables load-bearing capacity.
2. Frame system: The frame adopts a plate frame structure, consisting of longitudinal beams, transverse beams, and steel plates forming a "#" - shaped skeleton plate frame structure, with steel plates laid on the workbench. The profiles and steel plates used comply with the corresponding national standards.
3. Control system: The control box can be wall mounted or floor standing, beautiful and practical, with anti-corrosion treatment on the surface. The control box is equipped with left, right, jog, stop buttons, and corresponding indicator lights. It can be automatically rotated 90 ° with one click, or manually operated with forward and reverse jog. The electrical components of the control box are all made of internationally renowned brand products.
4. Transmission system: The electric motor drives the reducer, transmitting power to the rotary device and driving the rotating table to rotate. Each component is reliably connected to the main body. The motor adopts a brake motor with a protection level of IP44 and an insulation level of E.
5. The rust removal coating requires that the rust removal on the surface of steel plates, profiles, and castings and forgings should reach level ST2 in GB8923. The thickness of the paint film is 90-120um. Rust prevention treatment shall be carried out on all exposed machined surfaces before leaving the factory. Apply anti rust primer and dark gray topcoat on the surface.